How to remove Android applications to Micro SD

Not all Android has a large internal memory. Especially for a low-end Android only has internal memory of at least 1 GB. It certainly is not enough if we install the application, as any android application generates data and the stored cache.

If the internal memory is full, we will not be able to receive incoming sms. And also our typically slow android not playing *experience.

So how to solve it? The following are some ways according to my experience.

Tools Needed: 

1. Large-capacity Micro SD (I recommend at least 4-8 GB) and use a CARD READER (not the DATA CABLE) 
2. MiniTool Partition Wizard, download here (for partitions/split 2 capacity Micro SD) 
3. Link2SD (if the partition is already successful, useful to move app to SD)
4. Android is already in the ROOT. 

How to Partition: 

1. Insert the Micro SD CARD into the PC Card Reader (NOTE: Backup all data on your Micro SD because after the Micro SD will be partitioned, formatted) 
2. Install MiniTool Partition Wizard on your PC/Laptop. (If already installed, directly next to the way of 3)
3. Open MiniTool Partition Wizard and now you select the Micro SD
   drive (Disk 2), and then right-click to select delete so unallocated portions of  
4. Right click on the unallocated portions of a disk, and then click Create
5. Here we will begin to partition the Micro SD. The first partition that is useful for storing files music, videos, photos, etc. Follow the following ways:
   
   Us: Primary
   Create a File System: Fat32
   
   Recommended: 4 GB Micro SD
   = 2.5 GB
   Micro SD 8 GB = 5 GB
   
   Adjust to your needs, these are just
   as an example.
   after that click OK.
6. Now create a second partition to save Android applications. Right click on the disk and then click the Create (if there is a warning message, click OK. (This only as an example, please customize with your needs)
   
7. Now make the last partition is to help improve the performance of RAM. Right click on the disk, and then click Create.
   
   Us: Primary
   Create a File System: Linux Swap
   
   Recommended: 4 GB Micro SD
   = Remainder
   Micro SD 8 GB = Remainder
   
   
   click OK. 
8. If all is going wrong, now click APPLY in the upper left corner. (recommended turning off the antivirus and closes all applications except this MiniTool)
9. Partitioning complete. Re-insert the Micro SD into Android and is ready to use.
   

How to move an application With Link2SD: 

1. Download the PlayStore in Link2SD (Android should already be in the ROOT)  
   
2. Open the application Link2SD and here you will be prompted to choose a file system that suits you make on the partition. Select Ext2. After that, restart your smartphone 
   
3. Go back to Link2SD and please move the application that you want by clicking the Move To SD Card/Link to SD. If we Move To SD Card, then the entire application data switch to SD card, tp application effect often force close. While the Link To SD will leave some application data in internal and only a partial move to SD card. But the way applications seamlessly without force close.
   
4. Never move the application that reads Odex and Updated file system because it is an android. (get error androidnya later) And do not also move the application widget (example: battery widget and launcher)  
   
5. Done!